American Megatrends 780 Spezifikationen

ECN-780-Q67 Embedded System Page i IEI Technology Corp. User Manual , MODEL: ECN-780-Q67 Embedded System with 2nd Gen Intel® Core™ i7/i5/i3 Des

ECN-780-Q67 Embedded System Page x Figure 4-10: Keyboard/Mouse Connector Location ...

ECN-780-Q67 Embedded System Page 87  Maximum DEFAULT  IGD - Boot Typ e [VBIOS Default] Use the IGD - Boot Type option to select the display

ECN-780-Q67 Embedded System Page 88  Hidden Ctrl + P Enables hidden Ctrl+P function  Enter MEBx Setup Enables user to enter MEBx setup  Unconf

ECN-780-Q67 Embedded System Page 89  Off Does not enable the keyboard Number Lock automatically. To use the 10-keys on the keyboard, press the Nu

ECN-780-Q67 Embedded System Page 90  Boot Option Priorities Use the Boot Option Priorities function to set the system boot sequence from

ECN-780-Q67 Embedded System Page 91 5.8 Exit Use the Exit menu (BIOS Menu 25) to load default BIOS values, optimal failsafe values and to save confi

ECN-780-Q67 Embedded System Page 92  Save as User Defaults Use the Save as User Defaults option to save the changes done so far as user defaults.

ECN-780-Q67 Embedded System Page 93 6 Software Drivers Chapter 5

ECN-780-Q67 Embedded System Page 94 6.1 Available Software Drivers NOTE: The content of the CD may vary throughout the life cycle of the product

ECN-780-Q67 Embedded System Page 95 Figure 6-1: Drivers 6.3 Chips et Driver Installation To install the chipset driver, please do the following.

ECN-780-Q67 Embedded System Page 96 Figure 6-2: Chipset Driver Screen Step 5: When the setup files are completely extracted the Welcome Screen in

ECN-780-Q67 Embedded System Page xi Figure 6-19: LAN Driver Installation ...

ECN-780-Q67 Embedded System Page 97 Step 8: Read the License Agreement. Step 9: Click Yes to continue. Figure 6-4: Chipset Driver License Agree

ECN-780-Q67 Embedded System Page 98 Figure 6-5: Chipset Driver Read Me File Step 12: Setup Operations are performed as shown in Figure 6-6. Step 1

ECN-780-Q67 Embedded System Page 99 Step 15: Select “Yes, I want to restart this computer now” and click Finish.Step 0: Figure 6-7: Chipset Driver

ECN-780-Q67 Embedded System Page 100 Figure 6-8: Graphics Driver Read Me File Step 6: The installation files are extracted. See Figure 6-9. Step 7

ECN-780-Q67 Embedded System Page 101 Figure 6-10: Graphics Driver Welcome Screen Step 10: The License Agreement in Figure 6-11 appears. Step 11:

ECN-780-Q67 Embedded System Page 102 Figure 6-12: Graphics Driver Read Me File Step 14: Setup Operations are performed as shown in Figure 6-13. St

ECN-780-Q67 Embedded System Page 103 Figure 6-14: Graphics Driver Installation Finish Screen 6.5 LAN Driver Ins tallation To install the LAN driver

ECN-780-Q67 Embedded System Page 104 Figure 6-15: Intel® Network Connection Menu Step 6: The Welcome screen in Figure 6-16 appears. Figure 6-16:

ECN-780-Q67 Embedded System Page 105 Step 10: Click Next to continue. Figure 6-17: LAN Driver License Agreement Step 11: The Setup Options screen

ECN-780-Q67 Embedded System Page 106 Step 14: The Ready to Install the Program screen in Figure 6-19 appears. Step 15: Click Install to proceed wi

ECN-780-Q67 Embedded System Page xii Figure C-22: Auto Recovery Utility ...

ECN-780-Q67 Embedded System Page 107 6.6 Audio Driver Ins tallation To install the audio driver, please do the following. Step 1: Access the driver

ECN-780-Q67 Embedded System Page 108 Figure 6-22: Audio Driver Installation Step 7: When the installation is complete, the screen in Figure 6-23 a

ECN-780-Q67 Embedded System Page 109 6.7 USB 3.0 Driver Installation To install the USB 3.0 driver, please do the following. Step 1: Access the dri

ECN-780-Q67 Embedded System Page 110 Figure 6-25: USB 3.0 Driver Choose Install Location Step 8: The program is ready to install (Figure 6-26). St

ECN-780-Q67 Embedded System Page 111 Step 10: When the driver installation is complete, the screen in Figure 6-27 appears. Step 11: Click Finish

ECN-780-Q67 Embedded System Page 112 6-28 appears. Step 5: Click Next to continue. Figure 6-28: Intel® ME Driver Welcome Screen Step 6: The lic

ECN-780-Q67 Embedded System Page 113 Figure 6-29: Intel® ME Driver License Agreement Step 9: The Read Me file in Figure 6-30 appears. Step 10: Cl

ECN-780-Q67 Embedded System Page 114 Step 11: Setup Operations are performed as shown in Figure 6-31. Step 12: Once the Setup Operations are compl

ECN-780-Q67 Embedded System Page 115 Figure 6-32: Intel® ME Driver Installation Finish Screen

ECN-780-Q67 Embedded System Page 116 A Safety Precautions Appendix A

ECN-780-Q67 Embedded System Page xiii Lis t of Tables Table 1-1: Model Variations ...

ECN-780-Q67 Embedded System Page 117 WARNING: The precautions outlined in this chapter should be strictly followed. Failure to follow these preca

ECN-780-Q67 Embedded System Page 118 A.1.2 Anti-static Precautions WARNING: Failure to take ESD precautions during the installation of the ECN-780

ECN-780-Q67 Embedded System Page 119 A.1.3 Product Disposal CAUTION: Risk of explosion if battery is replaced by and incorrect type. Only certif

ECN-780-Q67 Embedded System Page 120  The interior of the ECN-780-Q67X does not require cleaning. Keep fluids away from the ECN-780-Q67 interior.

ECN-780-Q67 Embedded System Page 121 B BIOS Me n u Options Appendix B

ECN-780-Q67 Embedded System Page 122  BIOS Information ...

ECN-780-Q67 Embedded System Page 123  Bits per second [115200] ...

ECN-780-Q67 Embedded System Page 124 Appendix C C One Key Recovery

ECN-780-Q67 Embedded System Page 125 C.1 One Key Recovery Introduction The IEI one key recovery is an easy-to-use front end for the Norton Ghost sys

ECN-780-Q67 Embedded System Page 126 After completing the five initial setup procedures as described above, users can access the recovery tool by pr

ECN-780-Q67 Embedded System Page 1 Chapter 1 1 Introduction

ECN-780-Q67 Embedded System Page 127 partitions. Please take the following table as a reference when calculating the size of the partition. OS O

ECN-780-Q67 Embedded System Page 128 o Ubuntu 8.10 (Intrepid) o Ubuntu 7.10 (Gutsy) o Ubuntu 6.10 (Edgy) o Debian 5.0 (Lenny) o Debian 4.0 (Etc

ECN-780-Q67 Embedded System Page 129 C.2.1 Hardware and BIOS Setup Step 1: Make sure the system is powered off and unplugged. Step 2: Install a ha

ECN-780-Q67 Embedded System Page 130 Figure C-2: Launching the Recovery Tool Step 3: The recovery tool setup menu is shown as below. Figure C-3

ECN-780-Q67 Embedded System Page 131 Figure C-4: Command Prompt Step 5: The command prompt window appears. Type the following commands (marked in

ECN-780-Q67 Embedded System Page 132 Figure C-5: Partition Creation Commands

ECN-780-Q67 Embedded System Page 133 NOTE: Use the following commands to check if the partitions were created successfully. Step 6: Press any

ECN-780-Q67 Embedded System Page 134 C.2.4 Building the Recovery Partition Step 1: Put the recover CD in the optical drive. Step 2: Start the syst

ECN-780-Q67 Embedded System Page 135 Step 5: The Symantec Ghost window appears and starts configuring the system to build a recovery partition. In

ECN-780-Q67 Embedded System Page 136 C.2.5 Create Factory Default Im a g e NOTE: Before creating the factory default image, please configure the

ECN-780-Q67 Embedded System Page 2 1.1 Overview Figure 1-1: ECN-780-Q67 The ECN-780-Q67 is an embedded system with one VGA port, one DVI port

ECN-780-Q67 Embedded System Page 137 Figure C-12: About Symantec Ghost Window Step 4: Use mouse to navigate to the option shown below (Figure C-13

ECN-780-Q67 Embedded System Page 138 Figure C-14: Select a Local Source Drive Step 6: Select a source partition (Part 1) from basic drive as shown

ECN-780-Q67 Embedded System Page 139 Figure C-16: File Name to Copy Image to Step 8: When the Compress Image screen in Figure C-17 prompts, click

ECN-780-Q67 Embedded System Page 140 Step 9: The Proceed with partition image creation window appears, click Yes to continue. Figure C-18: Image C

ECN-780-Q67 Embedded System Page 141 Step 12: The recovery tool main menu window is shown as below. Press any key to reboot the system. St ep 0:

ECN-780-Q67 Embedded System Page 142 Figure C-22: Auto Recovery Utility Step 3: Reboot the system from the recovery CD. When prompted, press any k

ECN-780-Q67 Embedded System Page 143 Step 5: The Symantec Ghost window appears and starts configuring the system to build an auto recovery partitio

ECN-780-Q67 Embedded System Page 144 Step 7: The Symantec Ghost starts to create the factory default image (Figure C-27). Figure C-27: Image Creat

ECN-780-Q67 Embedded System Page 145 BIOS SETUP UTILITY Main Advanced PCIPNP Boot Security Chipset Exit iEi Feature  Au

ECN-780-Q67 Embedded System Page 146 Step 2: Install Linux operating system. Make sure to install GRUB (v0.97 or earlier) MBR type and Ext3 partiti

ECN-780-Q67 Embedded System Page 3  Intel® HD graphics supports H.264/AVC-MPEG2/VC1, DirectX 10.1 and OpenGL 3.0  On-board 2GB DDR3 memory and

ECN-780-Q67 Embedded System Page 147 DISKPART>create part pri size= ___ DISKPART>assign letter=N DISKPART>exit system32>format N:

ECN-780-Q67 Embedded System Page 148 Figure C-31: Access menu.lst in Linux (Text Mode) Step 6: Modify the menu.lst as shown below. Step 7: The

ECN-780-Q67 Embedded System Page 149 C.5 Recovery Tool Functions After completing the initial setup procedures as described above, users can access

ECN-780-Q67 Embedded System Page 150 WARNING: All data in the system will be deleted during the system recovery. Please backup the system files be

ECN-780-Q67 Embedded System Page 151 Figure C-35: Recovery Complete Window C.5.2 Backup System To backup the system, please follow the steps below.

ECN-780-Q67 Embedded System Page 152 Figure C-37: System Backup Complete Window C.5.3 Restore Your Last Backup To restore the last system backup, p

ECN-780-Q67 Embedded System Page 153 Figure C-39: Restore System Backup Complete Window C.5.4 Manual To restore the last system backup, please foll

ECN-780-Q67 Embedded System Page 154 C.6 Restore Systems from a Linux Server through LAN The One Key Recovery allows a client system to automatica

ECN-780-Q67 Embedded System Page 155 C.6.1 Configure DHCP Server Settings Step 1: Install the DHCP #yum install dhcp (CentOS, commands marked in re

ECN-780-Q67 Embedded System Page 156 filename “pxelinux.0”; C.6.2 Configure TFTP Settings Step 1: Install the tftp, httpd and syslinux. #yum inst

ECN-780-Q67 Embedded System Page 4 System Function USB 2 x USB 3.0 on rear side 2 x USB 2.0 on front side Ethernet 2 x RJ-45 Gigabit LAN RS-232 1 x

ECN-780-Q67 Embedded System Page 157 Debian Replace the TFTP settings from “inetd” to “xinetd” and annotate the “inetd” by adding “#”. #vi /etc/in

ECN-780-Q67 Embedded System Page 158 C.6.4 Start the DHCP, TFTP and HTTP Start the DHCP, TFTP and HTTP. For example: #service xinetd restart CentOS

ECN-780-Q67 Embedded System Page 159 Modify: [image] comment = One Key Recovery path = /share/image browseable = yes writable = yes public

ECN-780-Q67 Embedded System Page 160 Step 2: Continue to configure the Boot Option Priorities BIOS option of the client system: Boot Option #1  re

ECN-780-Q67 Embedded System Page 161 NOTE: A firewall or a SELinux is not in use in the whole setup process. If there is a firewall or a SELinu

ECN-780-Q67 Embedded System Page 162 C.7 Other Information C.7.1 Using AHCI Mode or ALi M5283 / VIA VT6421A Controller When the system uses AHCI m

ECN-780-Q67 Embedded System Page 163 Step 5: When the following window appears, press <S> to select “Specify Additional Device”. Step 6: I

ECN-780-Q67 Embedded System Page 164 Step 7: After pressing <Enter>, the system will get into the recovery tool setup menu. Continue to follo

ECN-780-Q67 Embedded System Page 165 D Watchdog Timer Appendix D

ECN-780-Q67 Embedded System Page 166 NOTE: The following discussion applies to DOS environment. IEI support is contacted or the IEI website

ECN-780-Q67 Embedded System Page 5 Weight (Net/Gross) 3.1 Kg/4.3 Kg Safety & EMC CE/FCC Table 1-2: Technical Specifications 1.5 Front Panel The

ECN-780-Q67 Embedded System Page 167 NOTE: When exiting a program it is necessary to disable the Watchdog Timer, otherwise the system resets. Exam

ECN-780-Q67 Embedded System Page 168 Appendix E E Hazardous Materials Dis clos ure

ECN-780-Q67 Embedded System Page 169 E.1 Hazardous Materials Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without

ECN-780-Q67 Embedded System Page 170 Part Name Toxic or Hazardous Substances and Elements Lead (Pb) Mercury (Hg) Cadmium (Cd) Hexavalent Chromium (

ECN-780-Q67 Embedded System Page 171 此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符合中国 RoHS 标准规定的限量要求。 本产品上会附有”环境友好使用期限”的标签，此期限是估算这些物质”不会有泄漏或突变”的年限。本产品可

ECN-780-Q67 Embedded System Page 6  1 x RS-232 DB-9 connector (COM1)  1 x DVI-D port  1 x HDMI port  1 x Reset button  2 x RJ-45 LAN conne

ECN-780-Q67 Embedded System Page ii Revis ion Date Version Changes 5 July 2013 1.03 Update the pictures of rear panel Add NOTE in Section 3.7.1

ECN-780-Q67 Embedded System Page 7 1.7 Dimensions The physical dimensions are shown below: Figure 1-4: Physical Dimensions (mm)

ECN-780-Q67 Embedded System Page 8 Chapter 2 2 Unpacking

ECN-780-Q67 Embedded System Page 9 2.1 Anti-static Precautions WARNING: Failure to take ESD precautions during installation may result in permanen

ECN-780-Q67 Embedded System Page 10 2.3 Unpacking Checklist NOTE: If some of the components listed in the checklist below are missing, please do no

ECN-780-Q67 Embedded System Page 11 Quantity Item and Part Number Im a g e 1 Thermal pad (P/N: 34100-000197-RS) 1 Utility CD 1 One Key Recov

ECN-780-Q67 Embedded System Page 12 Chapter 3 3 Ins tallation

ECN-780-Q67 Embedded System Page 13 3.1 Installation Precautions During installation, be aware of the precautions below:  Read the user manual: Th

ECN-780-Q67 Embedded System Page 14 Figure 3-1: Retention Screws Removal Step 2: Open the HDD cover and locate the HDD bracket (Figure 3-2). F

ECN-780-Q67 Embedded System Page 15 Step 3: Attach the HDD to the HDD bracket, and then slide the HDD to connect the HDD to the SATA connector. Sec

ECN-780-Q67 Embedded System Page 16 Figure 3-4: AT/ATX Switch Location Step 2: Adjust the AT/ATX switch. Step 0: 3.4.1 AT Power Mode With the AT

ECN-780-Q67 Embedded System Page iii Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order

ECN-780-Q67 Embedded System Page 17  Point-of-Sale (POS)  Advertising terminal 3.5 Reset the System The reset button enables user to reboot the

ECN-780-Q67 Embedded System Page 18 Figure 3-6: Power Button Location 3.7 Mount the System The ECN-780-Q67 supports wall mounting. The bottom pan

ECN-780-Q67 Embedded System Page 19 Step 2: Align the two retention screw holes in each bracket with the corresponding retention screw holes on the

ECN-780-Q67 Embedded System Page 20 3.8 External Peripheral Interface Connectors The following external peripheral devices can be connected to the e

ECN-780-Q67 Embedded System Page 21 Figure 3-10: Peripheral Connectors (Rear Panel) 3.8.1 Audio Connection The audio jacks on the external audio co

ECN-780-Q67 Embedded System Page 22 Figure 3-11: Audio Connector Step 3: Check audio clarity. Check that the sound is coming through the right spe

ECN-780-Q67 Embedded System Page 23 Figure 3-12: DVI Connector Step 4: Secure the connector. Secure the DVI connector from the digital display dev

ECN-780-Q67 Embedded System Page 24 Figure 3-13: HDMI Connection Step 3: Insert the HDMI connector. Gently insert the HDMI connector. The connecto

ECN-780-Q67 Embedded System Page 25 Figure 3-14: LAN Connection Step 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN

ECN-780-Q67 Embedded System Page 26 Figure 3-15: DB-9 Serial Port Connector Step 3: Secure the connector. Secure the serial device connector to th

ECN-780-Q67 Embedded System Page iv Ta b le of Contents 1 INTRODUCTION ...

ECN-780-Q67 Embedded System Page 27 Step 2: Align the connectors. Align the USB device connector with one of the connectors on the external periphe

ECN-780-Q67 Embedded System Page 28 Step 3: Insert the VGA connector. Once the connectors are properly aligned with the insert the male connector f

ECN-780-Q67 Embedded System Page 29 Step 4: Properly install the Intel® Management Engine Components drivers from the iAMT Driver & Utility dir

ECN-780-Q67 Embedded System Page 30 Chapter 4 4 System Motherboard

ECN-780-Q67 Embedded System Page 31 4.1 Overview The ECN-780-Q671 embedded system motherboard comes with a number of peripheral interface connectors

ECN-780-Q67 Embedded System Page 32 Figure 4-2: Connector and Jumper Locations (Rear Side) 4.1.2 Motherboard Dimensions The main dimensions of the

ECN-780-Q67 Embedded System Page 33 Figure 4-4: Motherboard Dimensions (Rear Side) (mm) 4.1.3 Peripheral Interface Connectors The table below shows

ECN-780-Q67 Embedded System Page 34 Connector Type Label Power connector 2-pin wafer DC_IN1 RS-232 serial ports 10-pin header COM1, COM2, CO

ECN-780-Q67 Embedded System Page 35 Figure 4-5: Battery Connector Location Pin Description 1 VBATT 2 GND Table 4-2: Battery Connector Pinouts 4.

ECN-780-Q67 Embedded System Page 36 Figure 4-6: BIOS Programming Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 SPI_VCC 2 SPI_

ECN-780-Q67 Embedded System Page v 3.8.6 USB Device Connection ...

ECN-780-Q67 Embedded System Page 37 Figure 4-7: Digital I/O Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 +V5S 2 +V5S 3 DOUT4 4

ECN-780-Q67 Embedded System Page 38 Figure 4-8: EC Programming Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 +V3.3A_EC_CONN 2 FS

ECN-780-Q67 Embedded System Page 39 Figure 4-9: System Fan Connector Location Pin Description 1 GND 2 +V12S 3 FANPWM1 4 FANIN1 Table 4-6: System

ECN-780-Q67 Embedded System Page 40 Figure 4-10: Keyboard/Mouse Connector Location Pin Description 1 VCC5_KBMS 2 MSDATA 3 MSCLK 4 KBDATA 5 K

ECN-780-Q67 Embedded System Page 41 Figure 4-11: LED Module Connector Location Pin Description 1 +V5S 2 SATA_LED# 3 +V5A 4 GND Table 4-8: LED

ECN-780-Q67 Embedded System Page 42 Figure 4-12: PCIe Mini Card Slot Location 4.2.9 Power Connector CN Label: DC_IN1 CN Type: 2-pin wafer CN Locat

ECN-780-Q67 Embedded System Page 43 Figure 4-13: Power Connector Location Pin Description Pin Description 1 DC_IN 2 GND Table 4-9: Power Con

ECN-780-Q67 Embedded System Page 44 Figure 4-14: RS-232 Serial Port Connector Location Figure 4-15: RS-232 Serial Port Connector Location Pin Des

ECN-780-Q67 Embedded System Page 45 CN Type: 8-pin header CN Location: See Figure 4-16 CN Pinouts: See Table 4-11 This connector provides RS-422 o

ECN-780-Q67 Embedded System Page 46 Figure 4-17: SATA Drive Connector Locations 4.2.13 SATA Power Connectors CN Label: CN1, CN2 CN Type: 2-pin waf

ECN-780-Q67 Embedded System Page vi 5.1.1 Starting Setup ...

ECN-780-Q67 Embedded System Page 47 Figure 4-18: SATA Power Connector Locations Pin Description 1 +V5S 2 GND Table 4-12: SATA Power Connector Pi

ECN-780-Q67 Embedded System Page 48 Figure 4-19: SMBus Connector Location Pin Description 1 GND 2 SMB_DATA 3 SMB_CLK_A 4 +V5S Table 4-13: SMBu

ECN-780-Q67 Embedded System Page 49 Figure 4-20: SO-DIMM Connector Locations 4.2.16 K Type Thermocouple Connectors CN Label: CN4, CN5 CN Type: 2-

ECN-780-Q67 Embedded System Page 50 Pin Description 1 D1-/D2- 2 D1+/D2+ Table 4-14: Type K Thermocouple Connector Pinouts 4.2.17 TPM Connector CN

ECN-780-Q67 Embedded System Page 51 PIN NO. DESCRIPTION PIN NO. DESCRIPTION 15 +V3.3A 16 INT_SERIRQ 17 GND 18 PM_CLKRUN# 19 LPCPD# 20 SI

ECN-780-Q67 Embedded System Page 52 7 GND 8 VCC_USB23/45 Table 4-16: USB Port Connector Pinouts 4.2.19 VGA Connector CN Label: VGA1 CN Type: 10-

ECN-780-Q67 Embedded System Page 53 4.3 Jumper Settings NOTE: A jumper is a metal bridge that is used to close an electrical circuit. It consis

ECN-780-Q67 Embedded System Page 54 Pin Description Short 1-2 Keep CMOS Setup (Default) Short 2-3 Clear CMOS Setup Table 4-19: Clear CMOS Jumper

ECN-780-Q67 Embedded System Page 55 Figure 4-26: Flash Descriptor Security Override Jumper Location

ECN-780-Q67 Embedded System Page 56 Chapter 5 5 BIOS

ECN-780-Q67 Embedded System Page vii 6.4 GRAPHICS DRIVER INSTALLATION ...

ECN-780-Q67 Embedded System Page 57 5.1 Introduction The BIOS is programmed onto the BIOS chip. The BIOS setup program allows changes to certain sys

ECN-780-Q67 Embedded System Page 58 Key Function F4 key Save all the CMOS changes Table 5-1: BIOS Navigation Keys 5.1.3 Getting Help When F1 is

ECN-780-Q67 Embedded System Page 59 5.2 Ma in The Main BIOS menu (BIOS Menu 1) appears when the BIOS Setup program is entered. The Main menu gives

ECN-780-Q67 Embedded System Page 60  iWDD Ve rs io n  The iWDD Version displays the current iWDD version. The fields in iWDD Version cannot be

ECN-780-Q67 Embedded System Page 61 Aptio Setup Utility – Copyright (C) 2009 American Megatrends, Inc. Main Advanced Chipset Boot Security Save &am

ECN-780-Q67 Embedded System Page 62  ACPI Sleep State [S1 (CPU Stop Clock)] Use the ACPI Sleep State option to specify the sleep state the system

ECN-780-Q67 Embedded System Page 63  Disabled DEFAULT The real time clock (RTC) cannot generate a wake event  Enabled If selected, the Wake up e

ECN-780-Q67 Embedded System Page 64  TPM Support [Dis able] Use the TPM Support option to configure support for the TPM.  Disable DEFAULT TPM su

ECN-780-Q67 Embedded System Page 65  Intel Virtualization Technology [Enabled] Use the Intel Virtualization Technology option to enable or disable

ECN-780-Q67 Embedded System Page 66  Processor Cores: Lists the number of the processor core  Intel HT Technology: Indicates if Intel HT Technol

ECN-780-Q67 Embedded System Page viii C.6.2 Configure TFTP Settings ...

ECN-780-Q67 Embedded System Page 67  AHCI Mode Configures SATA devices as AHCI device.  Serial-ATA Controller 0 [Compatible] Use the Serial-ATA

ECN-780-Q67 Embedded System Page 68 5.3.7 USB Configuration Use the USB Configuration menu (BIOS Menu 10) to read USB configuration information and

ECN-780-Q67 Embedded System Page 69  Enabled DEFAULT Legacy USB support enabled  Auto Legacy USB support disabled if no USB devices are connect

ECN-780-Q67 Embedded System Page 70 5.3.8.1 Serial Port n Configuration Use the Serial Port n Configuration menu (BIOS Menu 12) to configure the ser

ECN-780-Q67 Embedded System Page 71  IO=3F8h; IRQ=3, 4 Serial Port I/O port address is 3F8h and the interrupt address is IRQ3, 4  IO=2F8h; IRQ=3,

ECN-780-Q67 Embedded System Page 72  IO=2E8h; IRQ=3, 4 Serial Port I/O port address is 2E8h and the interrupt address is IRQ3, 4 5.3.8.1.3 Serial

ECN-780-Q67 Embedded System Page 73 5.3.8.1.4 Serial Port 4 Configuration  Serial Port [Enabled] Use the Serial Port option to enable or disable t

ECN-780-Q67 Embedded System Page 74  Enabled DEFAULT Enable the serial port  Change Settings [Au to ] Use the Change Settings option to change t

ECN-780-Q67 Embedded System Page 75 Aptio Setup Utility – Copyright (C) 2009 American Megatrends, Inc. Advanced PC Health Status > CPU_F

ECN-780-Q67 Embedded System Page 76 o VBAT 5.3.9.1 Smart Fan Mode Configuration Use the Smart Fan Mode Configuration menu (BIOS Menu 14) to configu

ECN-780-Q67 Embedded System Page ix Lis t of Figures Figure 1-1: ECN-780-Q67 ...

ECN-780-Q67 Embedded System Page 77  Temperature of Start [75] WARNING: Setting this value too high may cause the fan to rotate at full speed on

ECN-780-Q67 Embedded System Page 78 The Start PWM option can only be set if the CPU Smart Fan control option is set to Auto Mode. Use the Start PWM

ECN-780-Q67 Embedded System Page 79 Aptio Setup Utility – Copyright (C) 2009 American Megatrends, Inc. Advanced COM1 Console Redirection [

ECN-780-Q67 Embedded System Page 80 Aptio Setup Utility – Copyright (C) 2009 American Megatrends, Inc. Advanced COM1 Console Redirection Se

ECN-780-Q67 Embedded System Page 81  57600 The transmission speed is 57600  115200 DEFAULT The transmission speed is 115200 5.4 iEi Feature Use

ECN-780-Q67 Embedded System Page 82 5.5 Chips et Use the Chipset menu (BIOS Menu 18) to access the Northbridge and Southbridge configuration menus

ECN-780-Q67 Embedded System Page 83 5.5.1 Northbridge Configuration Use the Northbridge Chipset Configuration menu (BIOS Menu 19) to configure the

ECN-780-Q67 Embedded System Page 84  128 M DEFAULT 128 MB of memory used by internal graphics device  256 M 256 MB of memory used by internal g

ECN-780-Q67 Embedded System Page 85  Azalia HD Au dio [Enabled] Use the Azalia HD Audio option to enable or disable the High Definition Audio cont

ECN-780-Q67 Embedded System Page 86 5.5.3 In te l IGD S WS CI Op Region Use the Intel IGD SWSCI OpRegion menu to configure the video device connecte